FG Rotary Geared Limit Switch for EOT Cranes in India.
Standard Gear Ratio:
1:12, 1:25, 1:33, 1:50, 1:75, 1:100, 1:150, 1:200, 1:400.
Customized gear ratios for Rotary Limit Switch are also available.
Manufacturer and Supplier of FG Rotary Geared Limit Switch for Industrial Cranes
Working principle of rotary limit switch
A rotary limit switch works on the principle of a worm
A worm drive mechanism is suited so that enough torque is generated to move the attached gears within
the limit switch .
the shaft of the limit switch has threads which are matches and attached to a helical gear.
As the shaft rotates , the gear rotates according to the gear ratio. The gears are attached to a cam mechanism which rotate along with the central gear, a rotary limit switch has a minimum of two cams , one for setting the upper limit of the hoist machinery and one for setting the lower limit of the hoist machinery .
Screws are provided for each cam .Each cam can be adjusted according to user requirements to fine tune the upper and lower limit these cams operate the contacts within the limit switch.
After the cam adjustment is done according to the user , as soon as the hoist machinery reaches the upper vertical limit, the cams operate the contacts which stop the moving machinery . The contacts can be of normal closed (NC) or normally open (NO) type. Once any limit is reached by the EOT crane , the crane will only be able to move in the opposite direction thus preventing an accident.
Aluminium Die cast Rotary geared limit Switch.
Manufactured for Strength & Reliability
Anand FG Rotary Geared Limit Switch Technical Data Specifications
|Material Cover||Shock Resistance Thermoplastic|
|Protection Degree||IP-55 Confirming to IS-13947(Part-1)1993 :Dust ingress and protect against low pressure water jet from any direction.|
|Gear Ratio||1:12.5, 1:25, 1:50,1:100 & 1:400|
|Cable Entries||2, 3/4" Conduit|
|Rated Voltage Insulation||500 VAC.|
|Thermal Test Current||10Amps|
|Maximum Speed||1200 rpm|
|Wire Connection||Screw Terminal|